Sunday 1 September 2013

Rain Water Harvesting on a 11.9 Hectare site " Dulga polyana"

I am currently working as part of a design team for a 11.9 hectare farming project here in Bulgaria. The project will consist of an  Organic Cherry Orchard designed by  The Research Institute of Organic Agriculture (FiBL)  and a Forest Garden with Cherry featuring as the dominant Upper Canopy specie. My role is to design a Forest Garden area as well as looking into the rainwater harvesting potential of the site.

View from the top of the watershed looking South
The immediate challenge is to provide an irrigation solution that will meet the water needs for the whole site. Its a difficult site in that although flanked by two streams to the east and west and the river Chervishtitsa  to South , the land is like a huge wedge rising up above the flanking streams. Relying solely on water from the streams is not feasible or desirable, as water levels are very low in the dry months. Interception will inevitably disrupt the existing ecosystems and expensive pumping will be necessary to get the water uphill.

There are over 5000 Cherry trees to be planted on this land and all will need irrigating, particularly in the early years. We estimated the water needs of the site to be 3300-3500m3 per year based on cultivating approx 7 ha of the 11.9 ha site.

Annual Average Rainfall data for the region along with favorable topography indicates good potential for harvesting rainwater and storing it on the land in one or more reservoirs. My mission is to establish the practicalities of this.  

  
A View from the South East / Boundaries marked with green line 
My main focus during my first two day field trip was to get an impression of how water is interacting with the site. I walked the perimeter of the site marking on a GPS any signs of water erosion i.e rills and gullies and looked for patches of vegetation that stood out in the landscape such as dry or lush patches. I logged the elevation of key points throughout the site and tracked the source of perennial water flows i.e streams and rivers around the land. The aim was to build a picture of how the rainfall would move across the land , where it would settle, where it would drain and identify where best to intercept and store this water. 
Once back to the computer I uploaded the GPS data to google earth and proceeded to sketch out my observations from the field onto the satellite image. I included erosion rills and gullies, elevation readings, slopes, current drainage channels etc. All this info on the map helps to build a vision of rainwater catchment potential of the site. With rainwater catchment the idea is to prevent water from draining off the site (causing erosion in this case) and divert it to an area where it can be stored. The ideal area to store the water should be the highest point on the land in order for the water reserve to be able to irrigate the largest percentage of crops via gravity.

Welcome to our Online Store where you can find Forest Garden/ Permaculture plants, seeds, bulbs and Polyculture multi-packs along with digital goods and services such as Online Courses, Webinars, eBooks, and Online Consultancy.  We hope you enjoy the store and find something you like :) It's your purchases that keep our Project going. Yuu can also find our full list of trees. shrubs and herbs for forest gardens on our website here 

 



The next step was to know what quantity of water is available to store. To work this out I needed to identify the watershed, i.e the area of surrounding land that contributes to a surface flow of water from rainfall events.

Watershed above The Site
Topographic maps are a great way of indicating the slope of the land. OpenStreetMap provides contour mapping for the world with 10m contour intervals, i.e each contour line is a difference of 10m elevation   from each other. This contour mapping can also overlay onto google earth. You can also adjust the appearance of the terrain on Google earth  if you would like the elevation to appear more pronounced in your views by modifying the 'Elevation Exaggeration value'. The default value is set to 1, but you can set it to any value from 1 to 3, including decimal points. Go to "Tools"  than to "Options" and you will see 'Elevation Exaggeration value' field under the Terrain section. This is great for getting a general overview of the terrain.   

1.5000 Contour Map of the site. The narrow contour lines indicate that the land slopes sharply  into the flanking streams 


Want to learn more about Regenerative Landscape Design? Join The Bloom Room!

The Bloom Room is designed to create a space for more in-depth learning, for sharing projects and ideas, for seeking advice and discovering opportunities.

Ultimately, it aims to build a more intimate, interactive, and actionable relationship between members, a way for the Bloom Room community to support each other’s projects and learning journeys, and to encourage and facilitate the design, build, and management of more regenerative landscapes across our planet.

What you can expect as a member of the Bloom Room

As a member of the Bloom Room you can expect;

  • Access to an interactive forum where you can ask questions,  direct what type of content you would like to see as well as share your own content and projects.

  • Monthly live session featuring general Q&A and tutorials on design software for creating and presenting polycultures.

  • Live session every month for members to showcase your projects, plans, designs, and gardens, with guest speakers from the community.

  • Full Access to all of the content on Substack

  • Future opportunities to join our Global Regenerative Landscape Design and Consultancy Service, with potential roles for those with the will and skill to join our design team.

  • An opportunity to take part in the group ownership of a Regenerative Landscape. You will find more details on that here.

Become a paid subscriber to our Substack to join. The annual subscription is currently $70 and the monthly subscription is $7 (monthly subscription excludes discounts for products and services) . You can join herewe look forward to meeting you!


Calculating Potential Rainwater Harvesting from Surface Runoff Annually

The rainwater catchment area above the site is approx 59624m2. This figure only includes the area of land  that slopes towards the eastern and western streams and provides a conservative estimate of land that will contribute surface flow to the drainage channels that provide input to the reservoirs

Taking a low estimate of the average annual rainfall for the region at 527mm. This indicates that the area can be expected to receive approx 527mm of rain per year
By multiplying annual average rainfall (527mm) with the area of the watershed, (59624m2), we can estimate how much rain can be expected to fall on the watershed in an average year.

59624m2 x 527mm = 31421848 L per annum

Taking into account the absorption and evaporation rates of this water into the soil I have used a conservative Runoff Coefficient Value of 0.1 in order to obtain the expected amount of surface runoff that can be expected to drain from the watershed.  

59624 x 527 x 0.1 = 3142184.8 L per annum

3142184.8 L = 3142m3


The next step is to establish a means to harness that water and store it on the landscape. 

Support Our Project 

If you appreciate the work we are doing you can show your support in several ways.

  • Become a member of the Bloom RoomA $70 annual or $7 per month subscription to our Substack provides you with access to live sessions, design tutorials, a members forum and more, see details here.

  • Make a purchase of plants or seeds from our Nursery or Online Store 

  • Joining us for one of our Practical Courses or Online Courses

  • Comment, like, and share our content on social media.


---------------------------------------------------------------------------------------------------------------

We offer a diversity of plants and seeds for permaculture, forest gardens and regenerative landscapes including a range of fruit and nut cultivars. We Deliver all over Europe from Nov - March. - Give a happy plant a happy home :)


Our Bio-Nursery - Permaculture/Polyculture/ Regenerative Landscape Plants 

17 comments:

  1. Where did you find the contour map for this place, by the way?

    ReplyDelete
    Replies
    1. We are working with a Hydro Engineer to design the reservoir, he provided the map. I can pass you his details if you are interested.

      Delete
    2. Yes, that'd be great. Thanks, much obliged! Does he also happen to have the appropriate machinery for the excavations?

      Delete
    3. His name is Miroslav - 2mminchev(at)gmail(dot)com. He only handles design.

      Delete
    4. https://www.kade.si/ - Here is the old contour map for Bulgaria. Choose "ETK-1-5000" in the upper right corner. Many more map styles are available from the menu.

      The contours are also accessible from the https://kais.cadastre.bg/bg/Map (Кадастър на Република България). Use "Слоеве" from the upper left corner (next to the magnifying glass) and look near the lower end - "Едромащабни топографски карти (ЕТК)"

      Delete
  2. Thanks, Paul. Do you know someone that handles excavations in a professional manner? I need them to be able to do valley, hillside and contour dams at least.

    ReplyDelete
    Replies
    1. Are you based in Bulgaria ? if so Miroslav should be able to put you in touch with contractors that can undertake this type of work.

      Delete
    2. I'm in Bulgaria for the moment. I'll talk to Miroslav, see what's his take on this matter. Thanks!
      This is Smilyan's brother, by the way. I haven't forgotten about the illustrations. You can see some samples on our FB page: facebook(dot)com/humadesigns

      I can easily make you something similar in style, better quality, have it be to scale, and according to any dimensions you provide. It's all free for you, of course.

      Kind regards

      Delete
    3. Hi Georgi
      I love the illustrations, great job!!
      I'm still in the observation stage at the moment but will be sure to contact you in the future.
      On a separate note do you know a place in Bulgaria where you can hire laser levels ?

      Cheers

      Delete
    4. Rentex are good (for other rented machinery as well):
      www(dot)rentex(dot)bg/catalog/view/lazeren_nivelir_(dot)html

      Also you can try at: mashinipodnaem(dot)com

      Or at: Kirov(dot)net

      We use a transit level, but since it's a two man job by necessity we are also now looking into buying a laser level. If you rent the laser level, you'll also have to rent a receiver (unless they come together) and a measuring staff otherwise the laser is pretty much useless outdoors.

      Delete
    5. No problem. Do you happen to know if any contractors in Bulgaria are using Lidar or drone technology for mapping?

      Delete
    6. No i don't, im sure it will be very expensive for the foreseeable future. Georgi, can we talk on skype tomorrow at some point or send me your email and i will write you.

      Cheers

      Paul

      Paul

      Delete
    7. In the west drone and LiDar seems to be very inexpensive ( an average 8$ per acre AFAIK). I'm looking into it, perhaps something to invest in in the future.

      We can talk tomorrow. I can manage after 12-13:00 PM. My personal Skype is: litenith

      Kind regards

      Delete
    8. Great, speak to you tomorrow between 12-13.00

      Delete